描述
Scubapro MK25 EVO S620Ti Regulator 調節器
Scubapro MK25 EVO S620 Ti 調節器將高性能的一級頭 MK25 EVO 與新的平衡式二級頭S620 Ti結合在一起。MK25 EVO 具有出色的抗凍性、出色的呼吸性能。
新型S620 Ti以升級的最先進設計，使用優異的鈦合金材質融合了Scubapro著名的S600的最佳功能，與S600相比的尺寸更小、更輕巧，但使用相同尺寸的隔膜。
S620 Ti 能在所有潛水條件下都毫不費力地提供平穩順暢的氣流，在所有水溫條件下，這款調節器都能給予您絕佳的潛水經驗。
一級頭：
- 鍍鉻黃銅體內的空氣平衡式活塞可提供恆定、輕鬆的氣流，不受深度，氣瓶殘壓或呼吸速率的影響。
- 獲得專利的XTIS（擴展隔熱系統）使內部機構與環境隔熱，從而將耐冷水性能提高了30％，並在極端冷水條件下延遲了冰的形成，而不會影響呼吸性能。隔熱系統的關鍵部件能以肉眼從外觀看到內部藍色的部分。
- 彈簧絕緣塗層，閥體絕緣襯套，防凍頭，較大的閥體和螺帽螺紋均與XTIS配合使用，以改善冷水性能。
- 在最極端的水溫下潛水時，防凍保護可從根本上提高呼吸的可靠性。
- 兩個相對的高壓端口允許一級頭向上或向下定位。
- 旋轉轉塔上的四個高流量和一個軸向超高流量低壓端口最大程度地增加了軟管佈線選擇。
- 外部中間壓力調節使技術人員可以快速輕鬆地微調性能。
- 提供3364psi / 232bar INT或4350psi / 300bar DIN配置。
- 2900psi / 200bar時的氣流：（l / min / SCFM）：> 8500/301
- 中壓（psi / bar）：130-142 / 9.0-9.8。
二級頭：
- 空氣平衡閥可在不同的深度和供應壓力下使吸入作用變得平穩。
- 堅固的增強型高科技聚合材料錶殼和前蓋能夠承受多年的劇烈潛水。
- 鈦合金堅固耐用，防腐蝕且重量輕，可長期保持可靠性。
- 在緊密的外殼內使用S600的大隔膜，實現最高性能的呼吸靈敏度。
- 潛水員可調整吸入氣流的旋鈕和真空輔助（VIVA）桿。
- 超流軟管具有超大孔徑，每次吸入都會使更多的空氣流動。
- 超舒適的省力咬嘴能讓上顎輕鬆咬合，不會阻礙氣流，舒適不易嘴痠。
- 2900psi / 200bar時的氣流：1850 l / min。
SCUBAPRO teams its high performance first stage with its new air balanced second stage. The MK25 EVO offers excellent resistance to freezing, superb inhalation sensitivity and instant delivery of air on demand.
The new S620 Ti embraces the best features of SCUBAPRO’s renowned S600 in an upgraded, state-of-the-art design. Smaller and lighter than the S600 but using the same-sized diaphragm, the S620 Ti delivers effortless airflow under all dive conditions.
The full titanium inlet tube is ultralight, the large purge button improves water circulation, and the new exhaust tee increases performance while directing bubbles out of the field of view. In all water temperatures, in all dive conditions, this new reg system is a winner.
First Stage
- Air-balanced flow-through piston in a chrome plated brass body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
- Patented XTIS (Extended thermal Insulating system) thermally insulates the inner mechanism from the environment, improving cold-water resistance by 30% and delaying ice formation in extreme cold-water conditions without compromising breathing performance. Key insulation system components are visible in blue.
- Spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
- Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
- Two opposing high pressure ports allow the first stage to be positioned either up or down.
- Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximize hose routing options.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- Available in either 3364psi/232bar INT or 4350psi/300bar DIN configurations.
- DIN version comes with a dual-compound wheel that features an ergo shape and soft grip on a rugged black nylon frame.
- Airflow at 2900psi/200bar: (l/min/SCFM): >8500/301.
- Intermediate pressure (psi/bar): 130-142/9.0-9.8.
Second Stage
-
- Air-balanced valve smoothes out the inhalation effort at varying depths and supply pressures.
- Rugged reinforced technopolymer case and front cover are able to withstand years of aggressive diving.
- Titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
- Uses the S600’s large diaphragm inside a compact casing for maximum breathing sensitivity.
- User controls include an easy-grip diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA) lever.
- Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
- Ultra-comfortable compact orthodontic mouthpiece is easy to grip yet doesn’t inhibit airflow.
- Airflow at 2900psi/200bar: 1850 l/min.