描述
Scubapro MK25 EVO G260 Regulator 調節器
Scubapro Mk25 Evo G260 調節器擁有史上最常被模仿的平衡式二級頭設計。其前身為 1986 年問世的G250 ,是首款導入可調節文丘里真空輔助 (VIVA) 系統的調節器。
如今的現代版本配備金屬零件(包括進氣管、節流孔、吸氣阻力控制旋鈕和中壓管接頭)具備絕佳的冷水抗凍性能。此外,它亦支援左右兩側的中壓管安裝選項,使其成為技術潛水配置的理想選擇。
MK25 EVO 平衡活塞式一級頭
- 鍍鉻黃銅體內的空氣平衡式活塞可提供恆定、輕鬆的氣流,不受深度,氣瓶殘壓或呼吸速率的影響。
- 獲得專利的XTIS(擴展隔熱系統)使內部機構與環境隔熱,從而將耐冷水性能提高了30%,並在極端冷水條件下延遲了冰的形成,而不會影響呼吸性能。隔熱系統的關鍵部件能以肉眼從外觀看到內部藍色的部分。
- 彈簧絕緣塗層,閥體絕緣襯套,防凍頭,較大的閥體和螺帽螺紋均與XTIS配合使用,以改善冷水性能。
- 在最極端的水溫下潛水時,防凍保護可從根本上提高呼吸的可靠性。
- 兩個相對的高壓端口允許一級頭向上或向下定位。
- 旋轉轉塔上的四個高流量和一個軸向超高流量低壓端口最大程度地增加了軟管佈線選擇。
- 外部中間壓力調節使技術人員可以快速輕鬆地微調性能。
- 提供3364psi / 232bar INT或4350psi / 300bar DIN配置。
- 2900psi / 200bar時的氣流:(l / min / SCFM):> 8500/301
- 中壓(psi / bar):130-142 / 9.0-9.8。
G260 二級頭
- 擁有Scubapro 較大尺寸的外殼與氣流平衡式膜片設計,無論在水中的姿勢如何,都能靈敏偵測吸氣動作,提供穩定順暢的氣量。
- 關鍵內部零件採用高級金屬材質製成,可在極端條件下潛水時,大幅提升抗凍性能。
- 潛水員可調整吸入氣流的旋鈕和真空輔助(VIVA)桿。
- 軟管接頭可依據走線需求,自由更換由左側或右側進氣,能輕鬆調整技術潛水配置。
- 堅固的增強型高科技聚合材料錶殼和前蓋,能夠承受多年的劇烈潛水。。
- 超流軟管具有超大孔徑,每次吸入都會使更多的空氣流動。
- 2900 psi / 200 bar 時的氣流:1800 l/min 。
MK25 EVO First Stage:
- Air balanced flow-through piston in a chrome-plated brass body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
- Patented XTIS (Extended Thermal Insulating System) fully isolates the mechanical elements from the cold, increasing freezing resistance 30 percent over the previous MK25 without compromising breathing performance. Key insulation system components are visible in blue.
- New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
- Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
- Two opposing high pressure ports allow the first stage to be positioned either up or down.
- Five high-flow low pressure ports on a swivel turret maximize hose routing options.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- Available in either 3364psi/232bar INT or 4350psi/300bar DIN configurations.
- Weight: INT 232 (oz/g): 27.9/790; DIN 300 (oz/g): 20.1/570.
- Airflow at 2900psi/200bar: (l/min/SCFM): >8500/301.
- Intermediate pressure (psi/bar): 133-142/9.2-9.8.
G260 Second Stage:
- Nylon fiberglass design features SCUBAPRO’s largest second stage casing and diaphragm for the ultimate in breathing sensitivity, regardless of position in the water.
- Metal components, including metal air barrel and metal valve inlet tube, increase resistance to freezing when diving in extreme conditions.
- Air-balanced valve smoothes out the inhalation effort when diving at varying depths and supply pressures.
- High-flow exhaust valve reduces exhalation for better overall breathing comfort.
- Diver-adjustable inhalation effort knob fine-tunes air delivery to suit personal tastes.
- Venturi-Initiated Vacuum Assist (VIVA) dive/pre-dive switch prevents free flows in cold water or when used as an octopus.
- Reversible hose attachment allows you to easily adjust hose routing for tech diving configurations.
- Super-flow hose features an oversized bore (larger inside hose diameter) that allows more air to flow on each inhalation.
- Ultra-comfortable orthodontic mouthpiece is easy to grip yet doesn’t inhibit airflow.
- Weight (without mouthpiece): 9.5oz/268g.
- Airflow at 2900psi/200bar: 1800 l/min.



